The mineral processing processing center of Iran has 4 laboratory units (chemistry, mineralogy, processing and environment, safety and occupational health) and a semi-industrial processing unit. Click on the button below to download the compressed file containing all services and sample admission files.

Sample admission instructions

Form for acceptance of laboratory samples

Mineral Processing Laboratory Services

Chemistry Laboratory Services

Mineralogy Laboratory Services

Environmental and Occupational Health Labs Services


Sample admission instructions

Acceptance steps
• Customer's request in writing (by face-to-face or by fax)
• Center management approval
• Send to Customer Relations Unit
• Declaring cost estimation and feasibility of the services and issuing the pre-factor and sending it to the customer
• When the customer requests a project for service, this issue will be considered as a special request and will be reviewed through the project manager and relevant expert.
• Storage: In accordance with the standard set at the center of the sample retention period, 60 days after submitting the test results to the customer, this will not be charged to the customer until this time period. If the sample is kept, the surplus time is determined according to the following time cost Will be charged. In case of non-payment, samples will be extinguished at the end of 60 days.


Form for acceptance of laboratory samples

Due to the diversity of samples sent to the center and the necessity of observing the valid laboratory standards, in order to study and analyze the samples correctly, the requests were submitted in accordance with the prescribed tables in each laboratory and the exact study of the type of test and the methodology and the limit of diagnosis and so on. Carefully be recorded in the acceptance form.

• Mineral Processing Laboratory LQS-F54
•Chemistry Lab LQS-F55
•Mineralogy Laboratory LQS-F56
•Environmental Laboratory LQS-F57
• Occupational health samples LQS-F58
•Sample submission terms LQS-F59

Storage and Sample Storage Conditions
For samples of environmental and professional health, samples are required to be submitted in accordance with the requirements of the LQS-F59 form.

To download the forms individually click on the above and if you would like to download all the files in one place click on the link below.


Mineral Processing Laboratory Services

The services of the mineral processing laboratory are as follows:

   • Sample preparation - Stones breakdown
   • Sample preparation - Homogeneity
   • Sample preparation - milling
   • Powdering
   • Determine the grinding time
   • Labor index
   • Failure Function - Grinding Design
   • simulation
   • Physical separation
   • Granulation
   • Flotation
   • Hydrometallurgy
   • Specific gravity measurement
   • Sedimentation and dewatering
   • Filtering
   • Drying
Click on the link below to download the laboratory services for the mineral processing laboratory.


Chemistry Laboratory Services

The chemistry laboratory services include:
• Preparation
• Measuring the concentration of the elements in solid samples by XRF method
• Concentration measurement of heavy metals by ICP-OES method
• Concentration measurement of metals in solid samples by ICP-OES
• Metering of metals concentration in professional health samples by atomic absorption method. Graphite furnace
• Concentration measurement of metals in professional health samples by ICP-OES
• Metering of metals concentration by atomic absorption method
• Measurement of Metals Concentration by Atomic Absorption - Graphite Furnace
• Measurement of Heavy Metal Concentration in Soluble Samples
• Concentration measurement of metals by ICP-Mass
• Other Services
Click the link below to download the chemistry lab services cost.


Mineralogy Laboratory Services

The services of the mineralogy laboratory include:
• Preparation
• Microscopic studies
• Electro-macroprobe (EPMA) and electron microscope (SEM)
• Devices, DSC-TG XRD

Click the link below to download the mineralogical laboratory services cost.


Laboratory Services Laboratory of Environment and Occupational Health

The services of the mineralogy laboratory include:
• Measurement of organic compounds in water and soil
• Polychlorinated biphenyls (PCBs) measurement.
• Measurement of total petroleum products
• Measurement of physicochemical and microbial parameters of water and wastewater
• Measure other items
• Occupational Health - Measurement of the chemical environment of the workplace
• Measure professional health samples with IC, HPLC
• Measurement of biological samples - Occupational health

Click the link below to download the Laboratory Services cost for the Environment and Occupational Health Labs.

8

Office of Representative Office of Iran Mineral Processing Research Center:
Room No. 410, North Tower, Foulad Building, Vali Asr Square, Tehran, Iran
Tel: +982184812135
Email : info@imprc.ir

Iran Mineral Processing Research Center:
IMPRC- Kavosh Research Twon, Kavosh Blv, Km 9 at Karaj Qazvin Freeway, Iran
Tel:+982692108361-70
Email : info@imprc.ir